Ankle support Guard (Non-Sterile)

Product Features

  • Ankle Support Guard can be used to support or immobilize ankle muscle strains or ligament sprains to relieve injured or uncomfortable muscles and tendons, allowing user to receive proper protection.
  • Adjustable design to enhance the stability of the user.
  • Stabilizes and supports user and stabilizes the part's mobility required in daily life.
  • Fabric is made of anti-mildew, anti-bacterial and deodorizing fabric, tested by SGS. The anti-bacterial activity value of Candida albicans is 2.9, and the fabric is tested after 30 times of washing. No colony formation of pneumonia bacteria has been found; tested by the national impartial test. The inhibition rate of Staphylococcus aureus and Escherichia coli is as high as 99.9%, deodorization rate is as high as 96%, tested by the Institute of Agricultural Science and Technology, and the inhibition rate of cat coronavirus is as high as 99.7%.
  • Fabric uses far infrared technology, which has a warming effect, promotes metabolism, and activates the effect of fitness. Upon completing SGS testing, the far infrared radiation rate is as high as 0.88.


Product Specifications

  • Ingredients/Materials:Anti-mold and anti-bacterial cloth + Polyester + Nylon + PE polyethylene + PC polycarbonate + POM plastic steel + Steel.


Product Dimension

  • S:(Ankle Support Guard) 18~20cm
  • M:(Ankle Support Guard) 20~23cm
  • L:(Ankle Support Guard) 23~25cm
  • XL:(Ankle Support Guard) 25~28cm



  • 1. Loosen the cable on the left and right sides of the ankle.
  • 2. Pull the knob upward (click), adjust and loosen the ankle guard left and right, and release the cable.
  • 3. (Method 1) Press the knob downward and ensure it is fastened (clicking sound). (Method 2) If the knob unable to be pressed down into the latch, turn the knob clockwise and press it down.
  • 4. The ankle guard is shared between the left and right sides, slot feet into the ankle guard from top to bottom, ensure the heel is wrapped in the rear opening and make sure that the left and right-side braces are on both sides of the ankle joint.
  • 5. Turn the knob clockwise direction to tighten cable and achieve fixed position. Stop turning the knob after reaching the suitable tightness, the cable will be fixed at the adjusted tightness. To release or remove, repeat opposite steps.
  • 6. Strap the left and right straps, forward through the back of the foot around the bottom of the foot, according to the appropriate degree of elasticity, the straps will be Velcroed to the same side of the adhesive straps.


Storage & Cleaning

  • Separate the aluminum bracket from the body of the guard before cleaning.
  • Hand wash recommended, use a neutral detergent, rub soiled area gently and wash with water. Do not use bleach to wash. Leave to dry after washing.
  • Leave to dry after washing and avoid leaving under sunlight.
  • Do not place in high temperature areas (such as: sunlight exposure) to avoid material deformation and shortening of shelf life
  • Do not wipe or scrub the product with brushes or sharp objects to avoid damage.


Buyers Guide

  • The photos of the products are displayed to ensure that the photos are consistent with the actual product, however, due to lighting, monitor color deviation, personal different understanding of color, color of the product may vary with photo. Such issues are not defects, the final color to the actual goods shall prevail, not in the scope of return or exchange.
  • Due to personal hygiene factors, once product is in contact with the water, if label being removed, or after unpacking and testing (with) and the risk of affecting health, product cannot be returned.
  • Returned goods must be in new condition (no scratches) and should have complete packaging [including the main product, accessories, internal and external packaging bags (boxes), and accompanying documents and information], otherwise the product cannot be returned.



  • Product is recommended to be used as directed by a medical professional.
  • If there is persistent discomfort or pain, stop using and consult a physician.
  • Avoid excessive pressure to prevent poor blood circulation.
  • When wearing protective gear, please ensure it is properly fixed, if not properly fixed, stop using to avoid injury.
  • If wrist guard is damaged, stop using.
  • If cables are broken, stop using.
  • Do not use product on an open wound or individuals who have allergic skin.



Name of Company: Lain Hong Co,. Ltd

Address: No.235-61, Zhuzijiao, Xinhua Dist., Tainan City 71244, Taiwan (R.O.C.)

Inquiry hotline: (06) 598-1079

Pharmaceutical license number: 6205060168

Name of manufacturer: Lain Hong Co,. Ltd & Shian Jia Meei Co,.Ltd

Manufacturer Address: NO.5, Hua Yuan 2nd St., Pei Hua Village Guan Miao Hsiang, Tainan Hsien 71842, Taiwan

License number: 6105030015


Product Model/Number Hardness(°) Density(kg/m³) Applicable Products
LH-2500 15~20 24 ±3 Water Sports Product (swimming float, life buoy, life buoy)
LH-1800 20~25 42 ±3 Yoga Sports Products (Foam Rollers)
LH-10002N 28 ±4 45 ±5 Backpack paddings
LH-10002N 30~35 80 ±5 Protective pads, acoustic pads, cushioning materials
LH-0800 40~45 90 ±5
LH-0600 45~50 100 ±10
LH-0500 50~55 135 ±5
RS-1000 18~22 80 ±10 Yoga Massage Rollers
RBM 20~25   Protective Equipment
RE-1000 18 ±4 45 ±10 Car liner, rear view mirror
RE-1200 21 ±4 60 ±10
CR 8~15 200 ±30 Diving Suits, Protective Equipments
CR 15~20 250 ±30
CR 20~25 350 ±30
EPDM 20~25 350 ±30 Automotive materials (weather resistant adhesive), solar materials, anti-vibration mats, sound deadening mats
EPDM 15~20 130 ±20
IEPE     Foldable Hiking Mats
SBR     Protective Equipment Material
Politec     Automotive materials (lights)
Inline content